Rubio Monocoat

'Fumed' Pre Treatment

$27.95

Rubio Monocoat

'Fumed' Pre Treatment

$27.95

Rubio Monocoat Fumed was developed to create a greying effect for oak wood without causing harmful or irritating vapours. RMC Fumed is always finished with RMC Oil. Unique effects are created through the combination of these products while the optimum molecular bond between RMC Oil and the wood is left intact. 

ATTENTION: This product is a pre-treatment and does not protect the wood. It has to be combined with one of our Rubio Monocoat finishing products for maximum protection.

DESCRIPTION: Rubio Monocoat Fumed has been especially developed to quickly give a fumed aspect to oak wood (or any other tannic acid-containing types of wood). RMC Fumed reacts on the tannic acid in the wood and not on the sapwood. Unique effects can be obtained with this product. RMC Fumed does not release any ammonia smell. RMC Fumed can be applied both manually and industrially. Variations in the end result of the finish – depending on the origin, tannic acid-content and quality of the wood – cannot be ruled out. RMC Fumed is always applied in combination with a finish from the RMC Oil-collection. This way an optimal molecular binding of the RMC-finishing product with the wood is guaranteed.

SPECIFIC CHARACTERISTICS: - Gives a ‘greying’ effect to the wood. - Does not irritate, does not release any toxic fumes or vapours. - Can be diluted with water if the concentration is too high.

DIRECTIONS FOR MANUAL APPLICATION: - Sand the planks until the desired effect has reached. - Remove any dust. - Apply RMC Fumed regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product. - Let the surface dry completely (12 to 48 hours). - Sand the surface lightly with a polisher equipped with a beige pad. - Remove any dust again. - Finish with Rubio Monocoat Oil.

CONSUMPTION - MANUAL APPLICATION: Depending on type of wood and preparation: +/- 20 to 40 g/m2. These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.

DIRECTIONS FOR INDUSTRIAL APPLICATION: - Sand the planks until the desired effect has been reached - Remove any dust. - Apply RMC Fumed regularly using a roller or a spray gun. If a smooth effect is required saturate the surface completely with the product. - Let the surface dry completely – to the air, with a drying tunnel or UV drying. - Sand the surface lightly with a brush sanding machine, fl utter or nylon. - Remove any dust again. 

CONSUMPTION - INDUSTRIAL APPLICATION: Depending on type of wood and preparation: +/- 5 to 15 g/m2. These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.

TECHNICAL CHARACTERISTICS: Physical state (20°C): liquid. Colour: colourless. Odour: specific. Solubility in water: mixable.

STORAGE: The product can be stored for up to 12 months. Store in dry conditions and in the original packaging. Keep away from frost.

PACKAGING: Bottles of 100 ml