Rubio Monocoat

'Pure' Oil Plus 2C

$32.95

Rubio Monocoat

'Pure' Oil Plus 2C

$32.95
Size:
Variant:

Are you looking for a natural floorboard oil, excellent hardwood oil or just an economical wood floor oil? Because Rubio Monocoat Oil Plus 2C is all these three, and even more… Rubio Monocoat Oil Plus 2C is a wood protector that colors and protects in only 1 single layer! It protects wood from water, heat and the daily wear & tear. It is the best oil for wood furniture, hardwood flooring, oak tables, just anything that is made out of wood!

Rubio Monocoat Oil Plus 2C is Fit for Food. You can apply it to floors, furniture, stairs… And their oil is also ideal for worktops and other surfaces where food is involved. 

Due to its advanced molecular bonding technology, Rubio Monocoat Oil Plus 2C has the following qualities:

  • Enhances the natural look and feel of the wood.
  • 0% VOC, does not contain any water or solvents.
  • Easy to maintain.
  • It’s a natural wood floor finish because the oil is made of linseed.
  • No overlaps or starting marks.
  • Minimal use: 30 - 50 m²/litre.
  • Can be applied to all wood types.
  • Certified
  • Very wear-resistant.
  • Water- and heat-resistant, ideal for kitchens and bathrooms.
  • Very fast curing: 80% in 2 days.
  • A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap.
  • Packaging: 100ml, 350 ml & 1.3 L
Technical characteristics:
Rubio Monocoat Oil Plus 2C (A) ·
Physical state at 20°C: liquid 
Odour: oily 
Flash point: > 99°C 
Density: > 0,9 kg/L 

VOC content: 0 g/L

Rubio Monocoat Accelerator (B) ·
Physical state at 20°C: liquid 
Colour: clear 
Odour: none 
Flash point: > 160°C (closed cup) 
VOC content: 0 g/L 

Storage · The product can be stored up to 36 months in dry conditions, and in its original packaging. Keep away from frost. · Storage: min -10 °C, max 50 °C · Transport temperature limits: min 5 °C, max 30 °C 

Instructions

STEP 1. Untreated wood: sand scratch-free without over-polishing the surface. Thoroughly remove sanding dust with a vacuum cleaner and remove the remaining dust particles with Rubio Monocoat Cleaner. Open wood pores guarantee a long-lasting finish and are essential for the absorption of the oil. We therefore strongly recommend moistening the surface evenly with water (water popping). In case of water popping, there is no need to apply Rubio Monocoat Cleaner.

STEP 2. Carefully mix the two components (1 to 2 minutes) with a ratio of approx. 3 units A to 1 unit B.

STEP 3. Once the cleaned surface is dry, spread out a small quantity of Rubio Monocoat Oil Plus 2C (cloth or polishing machine with thin beige pad). Work in zones of 5 - 10 m².

STEP 4. Let absorb during a few minutes. Thoroughly remove all excess of oil (cloth or polishing machine with white pad) within 15 minutes per zone. The surface should feel dry! Finish all zones the same way.

STEP 5. In a well ventilated room, the surface can be used 24 - 36 hours after the application. After 5 days a treatment with water and Rubio Monocoat products can be applied. In order to guarantee a long lifespan and protection, the use of Rubio Monocoat maintenance products is imperative. ›

Tips & tricks:

The product may NOT be diluted!

Stir the product well before application. When using several containers at one site, it is recommended to mix them for an even result. ·

Temperature application range : 8 – 30 °C ·

Humidity application range: follow wood specs ›

Consumption 30 - 50 m²/L, depending on the wood type, sanding and application method. Rubio Monocoat Oil Plus 2C may be used for a maximum of 4 - 6 hours after mixing.

Remarks: consumption industrial applications: 60 - 80 m²/L. These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.